Connect The Usb Cable And Turn On The Power - Xerox DocuMate 6480 User Manual

® ®
Xerox DocuMate 6460 / 6480
4. Stop when you see the "Complete the installation by connecting your hardware" window. Do
not click OK yet. Leave the window open and proceed to the next section.
Note: If you do not see this on-screen diagram for connecting the scanner, stop and follow the
instructions below.

Connect the USB Cable and Turn on the Power

1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
Check your computer's manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force
the plug into either connection.
14
Installation
User Guide