Scan From The Onetouch Button Panel - Xerox DOCUMATE 252 User Manual

Scanning

Scan from the OneTouch Button Panel

16
You can scan from the OneTouch Button Panel on the screen.
1. Adjust the paper guide for the width of paper and load the
documents with their tops into the automatic document feeder.
For Simplex (one-sided) scans, load the documents face down.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
2. Now click on the OneTouch icon in the Windows System Tray
(at the bottom right corner of the screen).
The OneTouch Button Panel appears and shows the first five
on-screen scanning buttons. Click the arrows to cycle through
all 9 settings.
The Properties window also appears in case you want to
change the scanning options before scanning.
3. On the screen—not on the scanner—click the button you want
to use to scan.
For example, if you want to
scan with button 2, which
converts the document to
PDF, click here.
The scanner begins scanning. Then, the scanned images
appear in the Destination Application, just as they would if you
scanned with the Simplex or Duplex scanner buttons.
The OneTouch Icon
Click the button you
want to use to scan.
Or if you want to scan with button 4,
which attaches the scanned
document to a blank email message,
click here.
DocuMate 252 Scanner User's Guide
Click these arrows
to navigate through
the 9 buttons.