Table of Contents
Advertisement
Recording
Timer Recording (cont'd)
Satellite Link
You can set the unit to start recording whenever it
detects the scart control signal from the external tuner.
Preparing for the Satellite Link Timer Recording:
[Preparation of your set top box]
• The external tuner should be equipped with
some kind of timer function. Using timer
function of the tuner, set it to be turned on
when it comes to the time you want to start
recording, and off when it comes to the time
you want to finish recording. (Refer to the
tuner's manual on how to set the timer.)
• Make sure to turn off the set top box when you
finish setting.
[Preparation on this unit]
• Make sure to select the desired Recording
mode beforehand.
External tuner (not supplied)
Scart cable (not supplied)
1) Press [SETUP].
2) Select "Recording" using [K / L], then press
[ENTER].
3) Select "Satellite Link" using [K / L], then press
[ENTER].
Satellite Link window will appear.
Recording
Auto Chapter
Recording Audio Select(XP)
Auto Finalise
Satellite Link
Bilingual Recording Audio
External Input Audio
Dubbing Mode
56
EN
DVD/VCR
DVD
ANTENNA
DIGITAL
AUDIO
S-VIDEO
COMPONENT
AV2(DECODER)
AUDIO OUT
OUT
OUT
VIDEO OUT
Y
IN
L
P
B
/C
B
COAXIAL
AV1(TV)
R
P
R
/C
R
OUT
VCR DVD
15 minutes
Dolby Digital
OFF
Main
Stereo
VCR
DVD
4) With start time, DVD/VCR and the recording
mode highlighted, press [ENTER].
Satellite Link
Start
17:30 DVD
To Standby Mode
5) Set the desired start time using [K / L / { / B].
• Change the value for the hour using [
confirm with [
B
].
• Change the value for the minute using [
confirm with [
].
B
• The hour can be selected between 0 to 23.
• If you wish to go back to the left, press [
6) Select DVD/VCR using [K / L], then press [B].
7) Select the desired recording mode using
[K / L], then press [ENTER].
Refer to page 38 for DVD or page 128 for VCR.
8) With "To Standby Mode" highlighted, press
[ENTER] again.
Satellite Link
Start
17:30
To Standby Mode
In a second, the unit will be turned off automatically
as it goes into the Satellite Link standby mode.
• Until the time you set in "Start", the clock will
appear on the front panel display.
• "sat" will appear on the front panel display at the
start time.
To cancel the Satellite Link function while in the
Satellite Link standby mode:
Press [T-SET] to turn on the unit.
To cancel the Satellite Link function while the
Satellite Link Timer Recording is in progress:
Press [STOP C] on the front panel.
VCR DVD
DVD
Mode
VCR
SP
K
/
L
], then
/
], then
K
L
].
{
VCR DVD
DVD
Mode
VCR
DVD
SP
Hide quick links:
Advertisement
Table of Contents
