Satellite Link - Toshiba D-VR610KU Owner's Manual

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to "SETTINGS FOR THE VIDEO INPUT" on page 20.
OPEN/
CLOSE
.@/:
GHI
PQRS
DISC MENU
CLEAR
REV
SKIP
PAUSE
DUBBING
REPEAT
42 42 EN EN
E9KGAUD_D-VR610KU_EN.indd 42 E9KGAUD_D-VR610KU_EN.indd 42

SATELLITE LINK

INPUT
SELECT HDMI
ABC DEF
TRACKING
JKL MNO
TUV WXYZ SAT.LINK SAT.LINK
TIMER TIMER
SPACE
PROG. PROG.
SETUP DISPLAY AUDIO
TOP MENU
ENTER ENTER
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
PLAY FWD
STOP STOP SKIP
VCR DVD
REC MODE REC
TIMER SET TIMER SET SEARCH ZOOM
SE-R0295
1
Press [SAT. LINK].
2
Use [K / L] to select the time, media
and recording mode, then press
[ENTER].
Satellite Link
DVD
Start Mode
VCR
12:00AM DVD
To Standby Mode
3
Use [K / L] or [the Number buttons]
to set the desired starting time, then
press [ ].
B
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in this step to set the
desired minutes.
• If you wish to go back to the left, press [{].
4
Use [K / L] to select a recording
media ("DVD" or "VCR"), then press
[ ].
B
5
Use [K / L] to select the recording
mode.
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
XP
2007/12/18 17:10:16 2007/12/18 17:10:16