Table of Contents
Advertisement
Recording
Dubbing Mode
Dubbing Mode
You can copy a DVD disc to a videotape or copy a
videotape to a DVD disc. This function will be
available only if the DVD disc or the tape is not copy
protected. Before starting this function, prepare for the
recording on the DVD-R/RW disc or the videotape.
See pages 38 and 128.
Note for recording to a tape:
• The tape's record tab is intact.
• The videotape is long enough to record the DVD disc.
Note for recording to a disc:
• The DVD disc is appropriate for the recording status.
See pages 10 and 38.
Insert a disc and a tape with a record tab.
1) In stop mode, press [SETUP].
2) Select "Recording" using [K / L], then press
[ENTER].
3) Select "Dubbing Mode" using [K / L], then
press [ENTER].
Option window will appear.
VCR to DVD
4) Select "VCR
DVD" using [K / L], then press
[ENTER].
Dubbing Mode
VCR
DVD
DVD VCR
5) Press [SETUP] to exit the setup menu.
6) Press [DVD].
Make sure to select a recording mode using
[REC MODE]. (See page 38.)
7) Press [VCR ].
8) Press [B (PLAY)] (VCR) on the unit, and then
press [PAUSE F] at the point you wish to start
recording.
9) Press [DUBBING].
VCR to DVD duplication will start.
10)Press [STOP C] to stop the recording.
Note For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be
• This unit will automatically stop the duplication if playback
• If the playback sound mode of VCR is set to "STEREO,"
• If you set "External input Audio" to "Stereo," the sound is
• While in video mode, if you set "External input Audio" to
• While in VR mode, if you set "External input Audio" to
4) Select "DVD
VCR DVD
5) Press [SETUP] to exit the setup menu.
6) Press [VCR].
7) Press [DVD].
8) Press [B (PLAY)] (DVD) on the unit, and then
9) Press [DUBBING].
10)Press [STOP C] to stop the recording.
Notes
• When you turn off the unit after setting the Dubbing Mode
• Dubbing Mode is available only if the tape or disc is not
• You cannot change the output mode during VCR to DVD
distorted because of the auto tracking function. This is not
a malfunction. Be advised to play back the tape until the
picture is stabilized, then set the starting point which you
wish to start recording, and start VCR to DVD duplication.
with no image detected for more than 3 minutes during
VCR to DVD duplication.
"LEFT" or "RIGHT," the sound mode upon dubbing is
automatically switched to "STEREO." If the playback
sound mode is set to "MONO," the sound mode upon
dubbing is also "MONO."
recorded in "Stereo" (both Video mode and VR mode).
"Bilingual," the audio set in "Bilingual Recording Audio"
mode is recorded.
"Bilingual," bilingual audio is recorded.
The main and sub audio will be simultaneously recorded
(VR mode). You can select audio modes during playback.
DVD to VCR
VCR" using [K / L], then press
[ENTER].
Dubbing Mode
VCR
DVD
DVD VCR
Make sure to select a recording mode using
[REC MODE]. (See page 128.)
press [PAUSE F] at the point you wish to start
recording.
DVD to VCR duplication will start.
to "DVD
VCR", the setting will be set to "VCR
automatically.
copy protected.
or DVD to VCR duplication.
VCR DVD
DVD"
EN
61
Hide quick links:
Advertisement
Table of Contents
