Notes
• If you have not set the clock, the clock setting window will
appear at step 3. In this case, press [ENTER]. Then
continue from step 4 in "Manual Clock Setting" on page 34
before programming the timer recording.
• You cannot set the End time for the Satellite Link Timer
Recording on this unit.
• Recording picture will be distorted if the copy protection
signal is being detected during Satellite Link Timer
Recording.
• When a regular Timer Recording and the Satellite Link
Timer Recording are overlapped:
Example 1
Timer Recording
Satellite Link
Actual Recording
Example 2
Timer Recording
Satellite Link
Actual Recording
Example 3
Timer Recording
Satellite Link
Actual Recording
EN
57