Rear Panel - Toshiba D-VR16SB Owner's Manual

Introduction
Index to parts and controls (cont'd)

Rear Panel

1
1. Mains cable
Connect to a standard AC outlet.
2. AV2 (DECODER) socket (DVD/VCR)
Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
3. AV1 (TV) socket (DVD/VCR)
Connect to the Scart socket on your TV. Use a
commercially available Scart cable.
4. DIGITAL AUDIO OUT (COAXIAL) jack (DVD)
Connect to an amplifier with digital input jack such
as a Dolby Digital decoder or DTS decoder. Use a
commercially available Coaxial cable.
5. AUDIO OUT jacks (DVD)
Connect to the audio input jacks on your TV. Use a
commercially available Audio cable.
6. S-VIDEO OUT jack (DVD)
Connect to the S-Video input jack on your TV. Use
commercially available S-Video cable.
Notes
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the
unit.
• This unit does not have an RF modulator.
16 EN
DVD/VCR
AV2(DECODER)
AV1(TV)
2 3
7. COMPONENT VIDEO OUT jacks
Connect to the component video input jacks on your
TV.
Use a commercially available Component Video
cable.
8. ANTENNA OUT jack (DVD/VCR)
Connect to the Aerial jack on your TV, cable box or
direct broadcast system. Use the supplied RF cable.
9. ANTENNA IN jack (DVD/VCR)
Connect to an antenna or cable.
DVD ANTENNA
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT VIDEO OUT
OUT OUT
Y
IN
L P
B
/C
B
COAXIAL
P
R R
/C
R
OUT
4 5 6 7 8 9