Setting The Clock; Auto Clock Setting; Manual Clock Setting - Toshiba D-VR16SB Owner's Manual

Basic Setup

Setting the clock

Auto Clock Setting

Channel Tuning must be set before setting Auto Clock.
1) In stop mode, press [SETUP].
2) Select "Clock" using [K / L], then press
[ENTER].
Setup
Required Setting
Playback
Display
Recording
Clock
Channel
Disc
Clock menu will appear.
3) Select "Auto Clock Setting" using [K / L], then
press [ENTER].
Clock
Clock Setting
Auto Clock Setting
Option window will appear.
4) Select "ON" using [K / L], then press [ENTER].
5) Press [SETUP] to exit.
6) Press [I/y ON/STANDBY] to turn off.
The Auto Clock function is activated.
This unit will search for the time only when the power
is off. Leave the unit off for several minutes to give it
time to set the clock.
Notes
• If you want to cancel "Auto Clock Setting", select "OFF"
• The default setting of "Auto Clock Setting" is "ON".
• The clock may set itself automatically after you connect
• To set the clock automatically, the channel assigned to
• The clock cannot be set automatically if you are not
• Once the auto clock setting is performed, the unit will
• The unit will correct the current time automatically at 8:00,
• Between 23:00 and 1:00, the Auto Clock function will not
VCR DVD
1) In stop mode, press [SETUP].
ON
2) Select "Clock" using [K / L], then press
3) Select "Clock Setting" using [K / L], then press
using [K / L] at step 4, and then press [ENTER].
the antenna cable to the unit and plug in the mains cable.
In this case, the current time will appear on the front panel
display.
"P04" must receive the PDC signal.
receiving a channel in your area that carries a time signal.
In this case, set the clock manually.
correct the current time by receiving PDC broadcasts
whenever you turn off the unit.
if the unit power is turned off.
operate even if the unit power is turned off.

Manual Clock Setting

[ENTER].
Setup
Required Setting
Playback
Display
Recording
Clock
Channel
Disc
Clock menu will appear.
[ENTER].
Clock
Clock Setting
Auto Clock Setting
Clock Setting menu will appear.
Press [ENTER] again.
Default date will appear.
VCR DVD
ON
(Continued)
EN 33