Satellite Link - Toshiba DKVR60KU Owner's Manual

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to "SETTINGS FOR THE VIDEO INPUT" on page 27.
OPEN/
CLOSE
.@/:
GHI
PQRS
DISC MENU
CLEAR
REV
SKIP
PAUSE
DUBBING
REPEAT
E9PKBUD_DKVR60KU_EN.indd 43 E9PKBUD_DKVR60KU_EN.indd 43

SATELLITE LINK

INPUT
SELECT HDMI
ABC DEF
TRACKING
JKL MNO
TUV WXYZ SAT.LINK SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
ENTER
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
PLAY FWD
STOP STOP SKIP
VCR DVD
REC MODE REC
TIMER SET TIMER SET SEARCH ZOOM
SE-R0295
1
Select whichever the component
(DVD / VCR) you want to make a
recording to. (Refer to page 14.)
2
Select the desired recording mode.
(Refer to "Recording Mode" on page
34 for DVD or "Recording" on page
100 for VCR.)
3
Press [SAT. LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press [SAT. LINK] or [TIMER SET].
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP C].
EN EN 43 43
8/11/2009 4:00:38 PM 8/11/2009 4:00:38 PM