Removing A Memory Module - Toshiba Satellite 2430 User Manual

Removing a memory module

If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature
before you replace them.
If you have a Wireless LAN card installed, you will need to remove that
before you can remove or install a memory module.
To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the
computer.
Do not try to remove a memory module with the computer turned on. You
can damage the computer and the module.
2. Turn the computer upside down and remove the battery and one
screw securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will
force one end of the module up.
5. Grasp the module and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
6. Seat the cover and secure it with one screw.
7. Replace the battery.
Satellite 2430 Series
Removing the memory module
Optional Devices
7-8