Toshiba Satellite 2430 User Manual page 201

Supported frequency sub-bands
Subject to the radio regulations that apply in your country/region, your
Wireless LAN card may support a different set of 2.4 GHz channels (see
following table).
Consult your Authorised Wireless LAN or TOSHIBA Sales office for
information about the radio regulations that apply in your country/region.
Wireless IEEE 802.11 Channels Sets
Frequency Range
Channel ID
1
2
3
4
5
6
7
8
9
10
11
* Factory-set default channels
When installing Wireless LAN cards, the channel configuration is
managed as follows:
■
For Wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■
For Wireless LAN cards installed in Wireless clients operating in a
peer-to-peer mode, the card will use the default channel 10.
■
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Satellite 2430 Series
2400-2483.5 MHz
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457*
2462
Wireless LAN
K-4