Appendix I S-Registers - Toshiba Satellite 2430 User Manual

S0 Auto answer ring number
S1 Ring counter
S2 AT escape character (user defined)
S3 Command line termination character
Satellite 2430 Series
This register determines the number of rings the modem will
count before automatically answering a call. Enter 0 (zero) if you
do not want the modem to automatically answer at all. When
disabled, the modem can only answer with an ATA command.
Range: (0-255) or (0 or 2 to 6) depending on the country
Default: 0
Units: rings
This register is read only. The value of S1 is incremented with
each ring. If no ring occurs over a six-second interval, this
register is cleared.
Range: 0-225
Default: 0
Units: rings
This register determines the ASCII values used for an escape
sequence. The default is the + character. The escape sequence
allows the modem to exit data mode and enter command mode
when on-line. Values greater than 127 disable the escape
sequence.
Range: 0-255
Default: 43
Units: ASCII
This register determines the ASCII values as the carriage return
character. This character is used to end command lines and
result codes.
Range: 0-127, ASCII decimal
Default: 13 (carriage return)
Units: ASCII
S-registers
I-2