Toshiba Satellite 2430 User Manual page 178

Qn Result code control
T Select tone dialling
Vn DCE response format
Satellite 2430 Series
Result codes are informational messages sent from the modem
and displayed on your monitor. Basic result codes are OK,
CONNECT, RING, NO CARRIER, and ERROR. The ATQ
command allows the user to turn result codes on or off.
Q0 Enables modem to send result codes to the computer
(default).
Disables modem from sending result codes to the
Q1
computer.
Result Codes:
OK
n=0,1
ERROR Otherwise
This command instructs the modem to send DTMF tones while
dialling. Dialled digits are tone dialled until a P command or dial
modifier is received. This is the default setting.
This command controls whether result codes (including call
progress and negotiation progress messages) are displayed as
words or their numeric equivalents.
V0 Displays result codes as digits.
V1 Displays result codes as text (default).
Result Codes:
OK
n=0,1
ERROR Otherwise
AT Commands
H-6