4. Select 640 by 480, High Colour (16 bit), 60 Hertz.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as:
■
Digital video cameras
■
Hard disk drives
■
MO drives
■
Optical media drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
Precautions
■
Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer.
■
Do not transfer data in areas where static electricity is easily
generated or in areas subjected to electronic noise. Data can be
destroyed.
■
If you are transferring data through an IEEE1394 hub, do not connect
or disconnect other devices from the hub during data transfer. There
is a likelihood that data will be damaged. Connect all devices to the
hub before you turn on the computer's power.
Satellite 2430 Series
Resolution menu
Optional Devices
7-12