Problem
Some CD/DVDs run
correctly, but others
do not
Cannot write correctly
Satellite 2430 Series
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the disc's documentation.
Check the type of disc you are using. The drive
supports:
CD-DA, CD-ROM, CD-R/W, CD-R, CD-ROM XA
(except ADPCM), CD-I Ready, PhotoCD, Video
CD, CD-Extra (CD+), CD-text, DVD-Video,
DVD-ROM, DVD-R, DVD-RW, DVD-RAM
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the Drives section in
Chapter 2, The Grand Tour.
If you have trouble writing, make sure you are
observing the following precautions:
■
Use only media recommended by TOSHIBA.
■
Do not use the mouse or keyboard during
writing.
■
Use only the software supplied with the
computer for recording.
■
Do not run or start other software during
writing.
■
Do not jar the computer during writing.
■
Do not connect/ disconnect external devices
or install/remove internal cards during
writing.
If problems persist, contact your dealer.
Troubleshooting
8-9