Before Using The Machine; Part Names And Functions - Sharp AR-5520N Operation Manual

Chapter 1
1

BEFORE USING THE MACHINE

This chapter contains basic information that should be read before using the machine.

PART NAMES AND FUNCTIONS

16
Glass cleaner (when the RSPF is installed)
1
Use to clean the original scanning glass.
Document feeder cover (when the RSPF is
2
installed) /document cover
Open to make copies from the document glass.
(p.15)
Document glass
3
Place an original that you wish to scan face down
here. (p.15)
Handles
4
Use to move the machine.
Power switch
5
Press to turn the machine power on and off.
Operation panel
6
Contains operation keys and indicator lights.
Paper output tray
7
Copies and prints are deposited to this tray.
Front cover
8
Open to remove paper misfeeds and perform
machine maintenance.
4
1
2
3
4
5
15
(p.101)
(p.93, p.94, p.98)
7
6
Paper trays
9
Each tray holds 250 sheets of paper.
Side cover
10
Open to remove paper misfeeds and perform
machine maintenance.
Side cover handle
11
Pull to open the side cover.
Bypass tray guides
12
Adjust to the width of the paper.
Bypass tray
13
Paper including special paper (such as transparency
film) can be fed from the bypass tray.
(p.8)
Bypass tray extension
14
Pull out when feeding large paper such as B4 and
(p.6, p.7) A3. (p.11)
Charger cleaner
15
Use to clean the transfer charger.
10Base-T/100Base-TX LAN connector
16
Connect to your network to use the printer and
scanner functions. (Start Guide)
2
8
12 13
9
(p.92, p.93)
(p.92)
(p.11)
(p.102)
4
10
11
14
(p.10)
(p.11, p.26)