Using The Document Glass; Using The Rspf - Sharp AR-5520N Operation Manual

COPY FUNCTIONS

Using the document glass

1
Place the original that you wish to
copy onto the front side of the paper
on the document glass and close the
document cover.
After placing the original, be sure to close the
Note
document cover/RSPF. If left open, parts
outside of the original will be copied black,
causing excessive use of toner.
2
Select the original size.
3
Press the [ORIGINAL TO COPY] key,
and make sure that the
indicator is lit.
4
Set the number of copies and other settings,
and then press the [START] key (
The display blinks, and the original is scanned
into memory.
• If you need to clear the data scanned into
Note
memory, press the [CLEAR] key (
• If you wish to cancel two-sided copying and
just make a copy of the first original, press
the [READ-END] key (
5
When the start indicator lights, remove
the first original and then place the
original that you wish to copy onto the
back side of the paper on the document
glass. Close the document cover.
1 2
The first original The second original
6
Press the [START] key (
The copy will be delivered to the paper output
tray.
24
(p.15)
).
).
).
Place the second original
in the same orientation
as the first original.
).

Using the RSPF

1
Place originals in the RSPF.
If you place an odd number of originals for
one-sided to two-sided copying, the last page will
be one-sided.
2
Press the [ORIGINAL TO COPY] key
and select the two-sided copy mode
that you wish to use.
3
Set the number of copies and other
copy settings, and press the [START]
key ( ).
The copy will be delivered to the paper output
tray.
To cancel automatic two-sided copying, press
Note
the [CLEAR ALL] key (
(p.16)
• Two-sided copies from
one-sided originals
• Two-sided copies from
two-sided originals
• One-sided copies from
two-sided originals
).