Scanning From Your Computer; Scanning From A Twain-Compliant Application - Sharp AR-5520N Operation Manual

SCANNING FROM YOUR
COMPUTER
The machine supports the TWAIN standard, making it possible to scan from TWAIN-compliant applications. The
machine also supports WIA (Windows Image Acquisition), making it possible to scan from WIA-compliant
applications and the "Scanner and Camera Wizard" in Windows XP. For information on TWAIN and WIA settings,
see the help file for the scanner driver or Windows Help.
SCANNING FROM A TWAIN-COMPLIANT
APPLICATION
The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be used with a variety of
TWAIN-compliant applications.
1
Place the original(s) that you wish to
scan on the document glass/RSPF.
For information on setting an original for
scanning, refer to "SCANNING USING THE
KEYS ON THE MACHINE"
2
After starting TWAIN-compliant
application, click the "File" menu and
select a menu to scan.
The method for accessing the menu to select
Note
the scanner depends upon the application.
For more information, refer to the manual or
the help file of your application.
3
Select "SHARP MFP TWAIN U", and
click the "Select" button.
• If you are using Windows XP/Vista, you can
Note
also select "WIA-SHARP AR-XXXX" to
scan using the WIA driver.
"SCANNING FROM A WIA-COMPLIANT
APPLICATION (Windows XP/Vista)" (p.54)
• Depending on your system, "SHARP MFP
TWAIN U 1.0 (32-32)" and "WIA-SHARP
AR-XXXX 1.0 (32-32)" may appear in the
above "Select Source" screen.
4
Select the menu to acquire an image
from the application's "File" menu.
The scanner driver setup screen will appear.
"Scanner driver settings" (p.52)
50
(p.47).
5
In the "Scanning Source" menu,
select the location where you placed
the original in Step 1.
• If you placed a one-sided original in the RSPF,
select "SPF (Simplex)".
• If you placed a two-sided original in the RSPF,
select "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)" according to the binding
position of the original.
If you selected "SPF (Duplex-Book)" or "SPF
Note
(Duplex-Tablet)" in the "Scanning Source"
menu, select whether the orientation of the
placed original is "Right edge is fed first" or
"Top edge is fed first".
6
Click the "Preview" button.
The preview image will appear.
• If the angle of the image is not correct, reset
Note
the original, and click the "Preview" button
again.
• If the preview image is not oriented
correctly, click the "Rotate" button in the
preview screen. This rotates the preview
image 90 degrees clockwise, allowing you
to correct the orientation without resetting
the original.
• If you set multiple pages in the RSPF, the
machine previews only the top page of the
originals, and then sends it to the original
exit area. Return the previewed original to
the RSPF before starting the scanning job.
"Preview screen" (p.53)