Table of Contents
Advertisement
Chapter 5
5
USER SETTINGS
This chapter explains how to set the automatic exposure level, network settings through your web browser, and the
system settings, which are custom settings that control fine points of the machine's operation.
ADJUSTING THE AUTOMATIC
EXPOSURE LEVEL
The exposure level used in automatic exposure adjustment, which automatically adjusts the copy exposure
according to the original, can be adjusted. If copies tend to be too dark or too light when automatic exposure
adjustment is used, follow the steps below to adjust the automatic exposure level.
The automatic exposure level can be adjusted separately for the document glass and the RSPF.
Note
The copy, scanner and printer functions cannot be used while the automatic exposure level is being adjusted.
1
To adjust the automatic exposure
level in the RSPF, place the original in
the RSPF.
Make sure that the RSPF indicator is lit.
To adjust the automatic exposure level for
Note
copies made from originals placed on the
document glass, proceed to step 2.
2
Press the [AUTO/TEXT/PHOTO] key
(
/
AUTO
(
).
3
Hold down the [AUTO/TEXT/PHOTO]
key (
/
AUTO
indicator (
56
(p.16)
/
) to select "PHOTO"
/
) until the AUTO
) blinks.
AUTO
The exposure level
indicators show the
current setting.
4
Press the [Light] key (
key (
) to lighten or darken the
automatic exposure level as desired.
5
Press the [AUTO/TEXT/PHOTO] key
(
/
/
) to complete the
AUTO
setting.
The AUTO indicator (
lights steadily.
After adjusting the automatic exposure level, it
Note
is recommended that you make a test copy to
check the new level.
) or [Dark]
) stops blinking and
AUTO
Hide quick links:
Advertisement
Chapters
Table of Contents
