Chapter 3
3
PRINTER FUNCTIONS
This chapter explains how to use the printer functions.
The procedure for loading paper is the same as for loading copy paper. See
• Print jobs received while the machine is copying or scanning will be stored in memory. When the copy job is
Note
finished, the print jobs will begin printing.
• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the RSPF, printing will not be possible until the misfed original is removed and the
RSPF is restored to a usable state.
BASIC PRINTING
The following example explains how to print a document from WordPad.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Make sure that the ON LINE indicator
on the operation panel is lit.
• Lit, the machine is online and ready to print, or is
printing.
• Blinking, the machine is processing print data in
memory or printing has been paused.
• Off, the machine is off-line and cannot print.
2
Start WordPad and open the
document that you wish to print.
3
Select "Print" from the application's
"File" menu.
If the ON LINE indicator is
not lit, press the [ON
LINE] key (
When the indicator is:
The "Print" dialog box will appear.
4
Make sure that "SHARP AR-XXXX" is
selected as the printer.
If you need to change any print settings, click the
"Preferences" button to open the printer driver
setup screen.
).
Windows 2000 does not have the "Preferences" button
in this dialog box. Select settings as needed on each
of the tabs in the setup screen and click the "OK"
button.
"PRINTER DRIVER SETTING SCREEN" (p.37)
"SETTING ADVANCED PRINT FUNCTIONS" (p.38)
5
Click the "Print" button.
Printing begins.
The print job will be delivered to the output tray.
"LOADING PAPER"
(p.9).
The printer driver
setup screen will
appear.
35