Scanning; Using The Automatic Document Feeder And Scanner Glass; Scanning To A Computer - Sharp MX-C557F User Manual

Scanning

Scanning

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

Scanning to a computer

Before you begin, make sure that:
•
The printer firmware is updated. For more information, see
•
The computer and the printer are connected to the same network.
For Windows users
Note: Make sure that the printer is added to the computer. For more information, see
computer" on page 275.
1
Load an original document into the automatic document feeder or on the scanner glass.
2
From the computer, open Windows Fax and Scan.
3
From the Source menu, select a scanner source.
4
If necessary, change the scan settings.
5
Scan the document.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
"Updating firmware" on page
64
277.
"Adding printers to a