Registering Bluetooth Devices; Using A Bluetooth Headset - Siemens Gigaset DL500A User Manual

Registering Bluetooth devices

Registering Bluetooth
devices
Via Bluetooth™ your base can communicate
with other Bluetooth devices wirelessly
(range approx. 10 m). You must activate
Bluetooth on the base and register the
Bluetooth devices.
¢ ¢
v ò Bluetooth
Select and press
(³= activated).
If Bluetooth is activated, the ò icon appears
¢
in the idle display (
You can register the following devices via
Bluetooth:
u
A Bluetooth headset
u
Up to five Bluetooth GSM mobile phones
or data devices (PC, PDA)
Registering devices – recording them
in the list of trusted devices
The activated Bluetooth device is in range.
¢ ¢
v ò Bluetooth
/ Search for Mobile / Search for Data
Device
The Bluetooth names/addresses of the
devices found are displayed in a list (if neces-
sary, abbreviated). In the list:
q
Select the device to be regis-
tered.
§Options§
Press the display key.
Trust Device
Select and press
If five data devices/mobile phones are
already registered, the message Select
device to be replaced and trust again is dis-
played:
§Yes§
Confirm.
q
Select the registered device to
be overwritten and press
~
If necessary, enter a PIN of your
choice or the PIN of the Blue-
tooth device to be registered
and press
46
Activation
§Change§
,
page 4).
Search for Headset
§OK§
.
§OK§
.
§OK§
.
Generally you can enter a PIN of your choice
for a data device/GSM mobile telephone.
You must also enter this PIN in the data
device/mobile phone (handshake).
For a headset, you only need to enter a PIN if
the headset transmits a PIN not equal to
0000. A previously registered headset is
automatically de-registered.
In addition to the device names, various
icons with the following meaning are dis-
played:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
l
Bluetooth mobile phone

Using a Bluetooth headset

Recommendation
We recommend you assign the Headset
function to one of the function keys of
¢
the base ( page 47) and use this to
transfer/accept calls to/on the headset,
even if your headset has a push-to-talk
key.
Accepting/transferring calls on
the headset
Prerequisite: Bluetooth is activated. The
headset is registered and in range.
You are making a call on the base or a call is
signalled on the base.
¤
Press the Headset function key on the
base to accept the call on the headset.
Making calls
¤
Enter the phone number on the base and
press the Headset function key on the
base.