[Pet] - Panasonic LUMIX DMC-FZ18 Operating Instructions Manual

∫ Display the age/name
1 Press 3/4 to select [AGE] or [NAME] and
then press 1 .
2 Press 3/4 to select [ON] and then press
[MENU/SET].
• If [ON] is selected when the birthday or
name has not been registered, the
setting screen appears automatically.
• If [AGE] or [NAME] is set to [OFF]
even when the birthday or name has
been set, the age or name will not be
displayed. Before taking pictures, set
[AGE] or [NAME] to [ON].
• The focus range is 5 cm (Wide)/2 m (Tele) to
¶.
• [INTELLIGENT ISO] is activated, and
maximum ISO sensitivity level becomes
[ISO400], in [BABY1]/[BABY2].
• If the camera is turned on with [BABY1]/
[BABY2] set, the age and name are
displayed on screen for about 5 seconds,
along with the current date and time.
• The age display style differs depending on
the language setting in the recording mode.
• If the age is not properly displayed, check
the clock and birthday settings.
• If the quality is set to [RAW] or
[RAWiJPEG] and pictures are taken, the
name is not registered on the pictures.
• The birthday setting and name setting can
be reset with [RESET].
• Digital zoom cannot be used.
• The initial setting for [AF MODE] is [
Advanced (Recording pictures)

[PET]

Press [
menu and select a scene mode.
Select this when you want to take pictures of
a pet such as a dog or a cat.
You can set your pet's birthday and name.
You can select to have these appear at the
time of playback, or have them stamped on
the recorded image using [TEXT STAMP]
(P130).
• The age of the pet can be printed out using
the [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] software on
the CD-ROM (supplied). To print out the
pet's name, use
[PHOTOfunSTUDIO-viewer-]. [For details on
printing, refer to the operating instructions
(PDF file) of the software.]
For information about [AGE] or [NAME], refer
to [BABY1]/[BABY2] on P79.
• The initial setting for the AF assist lamp is
[OFF].
• Years prior to 2000 cannot be selected for
the [AGE] setting.
• [INTELLIGENT ISO] is activated, and
maximum ISO sensitivity level becomes
[ISO800], in [PET].
• The initial setting for the AF mode is [
• Refer to [BABY1]/[BABY2] for other
information about this mode.
].
- 80 -
MENU
] to display the [SCENE MODE]
SET
(P105)
(P76)
].