Panasonic LUMIX DMC-FZ18 Operating Instructions Manual page 164

∫ TV, PC and printer
1: The picture does not appear on the
television.
• Is the camera connected to the TV
correctly?
• Set the TV input to external input mode.
2: The display areas on the TV screen and
the camera's LCD monitor are different.
Depending on the TV model, the area
display may be smaller so the picture may
be stretched horizontally or vertically and
the top and bottom or left and right of the
picture may be cut off when it is displayed.
This is due to the TV specifications and is
not a malfunction.
3: The motion pictures cannot be played
back on a TV.
• Are you trying to play back the motion
pictures by directly inserting the card in
the card slot of the TV?
– Connect the camera to the TV with the
AV cable (supplied) and then play back
the pictures on the camera.
4: The picture is not displayed fully on the
TV.
• Set the aspect of the TV on the camera.
(P28)
5: The picture cannot be transferred
when the camera is connected to a PC.
• Is the camera connected to the PC
correctly?
• Is the camera recognised by the PC
correctly?
6: The card is not recognised by the PC.
(The built-in memory is recognised.)
• Disconnect the USB connection cable.
Connect it again while the card is inserted
in the camera.
7: The picture cannot be printed when the
camera is connected to a printer.
• Does the printer support PictBridge?
• Reset the mode to [
Others
(P150)
]. (P145)
- 164 -
8: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details, refer
to the operating instructions for the
printer.)
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.