Panasonic LUMIX DMC-FZ18 Operating Instructions Manual page 52

¥
—
— —
— —
— —
¥
—
— —
¢ When AUTO [
[ ], AUTO/Red-eye reduction
[ ] or Slow sync./Red-eye reduction
[ ] is set depending on the type of
subject and brightness.
• The flash setting may change if the
recording mode is changed. Set the flash
setting again if necessary.
• The flash setting is memorised even if the
camera is turned off. However, the advanced
scene mode or the scene mode flash setting
is reset to the initial setting when the
advanced scene mode or the scene mode is
changed.
Advanced (Recording pictures)
±
— —
— — —
— — —
¥
— —
±
— —
— — —
] is selected, AUTO
∫ The available flash range to take
±
pictures
¥
ISO sensitivity
¥
[AUTO]
±
±
¥
[ISO100]
[ISO200]
[ISO400]
[ISO800]
[ISO1250]
[ISO1600]
• The available flash range is an
approximation.
• In [HIGH SENS.]
ISO sensitivity automatically switches to
between [ISO1600] and [ISO6400] and the
available flash range also differs.
Wide: Approx. 1.15 m to approx. 24.2 m
Tele: Approx. 1 m to approx. 16.1 m
• The available focus range differs depending
on the recording mode.
• When the flash is used at the intelligent ISO
(P96) setting, the ISO sensitivity is increased
automatically to maximum ISO sensitivity
level.
- 52 -
Available flash range
Wide
30 cm to 6.0 m
Tele
1.0 m to 4.0 m
Wide
30 cm to 3.0 m
Tele
1.0 m to 2.0 m
Wide
40 cm to 4.2 m
Tele
1.0 m to 2.8 m
Wide
60 cm to 6.0 m
Tele
1.0 m to 4.0 m
Wide
80 cm to 8.5 m
Tele
1.0 m to 5.7 m
Wide
1.0 m to 10.7 m
Tele
1.0 m to 7.1 m
Wide
1.15 m to 12.1 m
Tele
1.0 m to 8.0 m
(P79) in scene mode, the
(P171)