Panasonic LUMIX DMC-FZ18 Operating Instructions Manual page 146

1 Turn on the camera and the printer.
2 Set the mode dial to [
3 Connect the camera to a printer via
the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [1] mark on the
[DIGITAL] socket.
• Hold the USB connection cable at 1 and
insert straight in or take straight out.
Connecting to other equipment
• If the mode dial is not set to [
].
camera is connected to the printer,
disconnect the USB connection cable, set
the mode dial to [
USB connection cable again. (Depending on
the printer, it may be necessary to turn it off
and then on again.)
• Do not use any other USB connection cables
except the supplied one.
• If a card is not inserted when the camera is
connected to the printer, you can access the
picture data on the built-in memory. If a card
is inserted, you can access the picture data
on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want to
switch between the built-in memory and the
card, disconnect the USB connection cable,
insert (or remove) the card and then connect
the USB connection cable to the printer
again.
• If you want to print the age in [BABY1]/
[BABY2] or [PET] in scene mode or the
number of days that have been passed since
the departure date in [TRAVEL DATE], use
the software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the PC.
To print the name of [BABY1]/[BABY2] or
[PET] or text (comments) which has been
entered using [TITLE EDIT], use
[PHOTOfunSTUDIO-viewer-]. For details,
refer to the operating instructions (PDF file)
of the software.
• To find out more about PictBridge compliant
printers, contact your local dealer.
- 146 -
] when the
] and then connect the