Printing The Pictures - Panasonic LUMIX DMC-FZ18 Operating Instructions Manual

• You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
switch between the built-in memory and the
card, disconnect the USB connection cable,
insert (or remove) the card and then connect
the USB connection cable to the PC again.
• The message [PLEASE RE-CONNECT THE
PRINTER.] appears if you change the mode
dial to print mode [
connected to a PC. If connecting the printer
again, change the mode to a mode other
than [ ] and then check that no data is
being transferred. ([ACCESS] appears on
the LCD monitor of this unit while data is
being transferred.)
Connecting to other equipment
] while this unit is
- 145 -

Printing the Pictures

By connecting the camera directly to a printer
supporting PictBridge via the USB connection
cable (supplied), you can select the pictures
to print and start printing on the camera's
screen.
Set print settings such as the print quality on
the printer beforehand. (Read the printer
operating instructions.)
DIGITAL/
AV OUT
DC IN 8.4V
A USB connection cable (supplied)
B AC adaptor (optional)
• It may take time to print some pictures. Use
a battery with sufficient battery power or the
AC adaptor (optional) when you connect to a
printer.
• Turn the camera off before inserting or
removing the cable for the AC adaptor
(optional).