Panasonic LUMIX DMC-FZ18 Operating Instructions Manual page 61

• When the burst mode setting is set to
Unlimited
– The burst speed becomes slower
halfway. The exact timing of this depends
on the type of card, the picture size and the
quality.
– You can take pictures until the capacity of
the built-in memory or the card is full.
• The focus is fixed when the first picture is
taken.
• The exposure and the white balance vary
depending on the burst mode setting. When
burst mode is set to [
the values set for the first picture.
When the burst speed is set to [
are adjusted each time you take a picture.
• If you are following a moving subject while
taking pictures in a place (landscape)
indoors, outdoors etc. where there is a large
difference between the light and shade, it
may take time until the exposure is stable. If
burst is used at this time, the exposure may
not become optimal.
• When the self-timer is used, the number of
recordable pictures in burst mode is fixed to
3.
• Burst mode is not cancelled when the
camera is switched off.
• When auto bracket and burst mode are set
simultaneously, auto bracket will be
performed.
• When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not enlarged.)
You cannot set the auto review function in
the [SETUP] menu.
• When burst mode is activated,
[AUDIO REC.] cannot be used.
• When the flash is activated, you can take
only 1 picture.
• Burst mode settings are not available in the
following cases.
– When the quality is set to [RAW] or
[RAWiJPEG]
– [STARRY SKY] and [BEACH] in scene
mode
Advanced (Recording pictures)
], they are fixed to
], they
- 61 -