Attaching the Lens
Hood
In bright sunlight or backlight, the lens hood
will minimise lens flare and ghosting. The lens
hood cuts off excess lighting and improves
the picture quality.
• Check that the camera is turned off.
• Close the flash.
1 Securely attach the hood adaptor
(supplied) so that it is all the way
into the lens barrel.
• Do not tighten the hood adaptor too much.
2 Place the camera upside down,
align the mark on the lens hood
with the mark A on the camera and
then insert the lens hood.
• Check if the screw is loose and then
attach the lens hood.
Preparation
3 Tighten the screw.
• Do not tighten the screw too much.
∫ Removing the hood adaptor
• Grasp the base of the hood adaptor to
remove it.
- 11 -