[Title Edit] - Panasonic LUMIX DMC-FZ18 Operating Instructions Manual

[TITLE EDIT]

Adding text (comments) to pictures
MENU
Press [ ] to display the [PLAY] mode menu
SET
and select the item to set.
You can add text (comments) to pictures.
After text has been registered, it can be
included in prints using [TEXT STAMP]
(P130). (Only alphabetic characters and
symbols can be entered.)
Press 3/4 to select [SINGLE] or
[MULTI] and then press [MENU/
SET].
∫ Single setting
1 Press 2/1 to select a picture and
then press 4.
• The title edit icon [
pictures that have already been recorded
with text in [BABY1]/[BABY2]
[PET] (P80) name settings in scene
mode or [TITLE EDIT].
Advanced (Playback)
(P120)
MENU
SET
] is displayed for
(P79) or
- 128 -
2 Press 3/4/2/1 to input the text
(comments) and then press [MENU/
SET] to register the text.
• Refer to the P129
text entry.
• Press [DISPLAY] to switch text between
[A] (capitals), [a] (small case) and [&/1]
(special characters and numbers).
• The cursor at the entry position can be
moved to the left with [
right with [ ].
• To enter a blank, move the cursor to
[SPACE], and press [MENU/SET].
• To stop editing at any time during text
entry, press [
• To delete an entered character, move
the cursor to [DELETE], and press
[MENU/SET].
• A maximum of 30 characters can be
entered.
3 Press 3/4/2/1 to move the cursor
to [EXIT] and then press [MENU/
SET] to end text input.
4 Press [MENU/SET] twice to close
the menu.
• You can also use the joystick to perform
1 4
steps to .
MENU
SET
for an example of the
], and to the
].