Panasonic LUMIX DMC-FZ18 Operating Instructions Manual page 27

[BEEP]
MENU
Press [ ] to display the [SETUP] menu and
SET
select the item to set.
This allows you to set the beep.
[ ]: No operation sound
[ ]: Soft operation sound
[ ]: Loud operation sound
[AF BEEP]
MENU
Press [ ] to display the [SETUP] menu and
SET
select the item to set.
This allows you to set the AF beep.
[ ]: No AF beep
[ ]: Soft AF beep
[ ]: Loud AF beep
[SHUTTER]
MENU
Press [ ] to display the [SETUP] menu and
SET
select the item to set.
This allows you to set the shutter sound.
[ ]: No shutter sound
[ ]: Soft shutter sound
[ ]: Loud shutter sound
[VOLUME]
MENU
Press [ ] to display the [SETUP] menu and
SET
select the item to set.
The volume of speakers can be adjusted in 7
steps from level 6 to 0.
• When you connect the camera to a TV, the
volume of the TV speakers does not change.
(P23)
(P23)
(P23)
(P23)
Preparation
[NO.RESET]
MENU
Press [ ] to display the [SETUP] menu and
SET
select the item to set.
Reset the file number of the next recording to
0001.
• The folder number is updated and the file
number starts from 0001.
• A folder number between 100 and 999 can
be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data on a
PC or elsewhere.
• To reset the folder number to 100, format
(P140) the built-in memory or the card first
and then use this function to reset the file
number.
A reset screen for the folder number will then
appear. Select [YES] to reset the folder
number.
[RESET]
MENU
Press [ ] to display the [SETUP] menu and
SET
select the item to set.
The [REC], [CUST. SET MEM.] or [SETUP]
menu settings are reset to the initial settings.
• [FAVORITE]
[ROTATE DISP.]
• If the [SETUP] menu settings are reset, the
following settings are also reset.
– The birthday and name settings for
[BABY1]/[BABY2]
scene mode.
– The number of days that have passed
since the departure date in
[TRAVEL DATE].
– The [WORLD TIME]
– [ZOOM RESUME]
• The folder number and the clock setting are
not changed.
- 27 -
(P23)
(P143)
(P23)
(P127) is fixed to [OFF] and
(P125) is fixed to [ON].
(P79) and [PET]
(P88)
(P90) setting.
(P38)
(P80) in