Setting The Relative Volume Level Of Each; Channel - Pioneer S-EV31V Operation Instruction Manual

Setting up for surround sound
Setting the relative volume
level of each channel
• Default setting: 0 dB
You can set the relative channels from your
main listening for each listening mode,
including all the Surround and Advanced
Surround modes.
1 Press SURROUND or ADVANCED
repeatedly to select a multichannel
listening mode.
2 Press TEST TONE (SHIFT+4) to hear the
test tone.
The test tone is output in the following order
(depending on the speakers active in the
current listening mode):
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• RS – Right surround speaker
• LS – Left surround speaker
• SW – Subwoofer
3 Press VOLUME +/– to adjust the
volume to an appropriate level.
4 Use the (cursor up/down)
buttons to adjust the speaker levels in
turn.
You should hear the test tone at the same
volume from each speaker when seated in
your main listening position. The channel
level range is ± 10 dB.
5 When you're done, press ENTER to
turn off the test tone.
STANDBY/ON
DVD/CD TAPE
DVD
AUDIO SUBTITLE
DSP
SURROUND ADVANCED
I — KEYCON — i
KARAOKE ECHO
CLOCK ADJ.
VOLUME
SYSTEM SETUP
HOME
MENU
ENTER
SOUND
MODE
/e 3 3
3
1
FOLDER –
4 8
PROGRAM REPEAT
1 2
TEST TONE CH LEVEL
4 5
7 8
TV CONTROL
INPUT

CHANNEL

SHIFT
5.1ch DVD SURROUND SYSTEM XXD3060
• The speaker volume can be adjusted
while listening to any sound source you
want by pressing CH LEVEL (SHIFT+5)
and then using the
down) buttons to adjust the channel
levels. After you're finished with one
channel, use the
buttons to move to the next.
• Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.
• The test tone can't be heard with the
headphones plugged in.
FM/AM LINE
ANGLE ZOOM
DVD DISP
MONO SYSTEM DISP
TIMER MUTE
TOP MENU
DVD MENU
RETURN
E/
¡
FOLDER +
7 ¢
RANDOM
3
CLEAR
SLEEP
6
ENTER
9 0
VOLUME
(cursor up/
(cursor left/right)
05
31
En