Resume And Last Memory - Pioneer S-EV31V Operation Instruction Manual

04 Getting started
Button
Numbers
Front panel controls
The (play/pause) and
the front panel work in exactly the same way
as their remote control equivalents.
The combined scan/skip buttons on the front
panel (
differently from the remote buttons. Press
and hold for fast scan; press for track/chapter
skip.
KARAOKE
DOLBY NR
(DEMO)
ASES
• You may find with some DVD discs that
some playback controls don't work for
certain parts of the disc. This is not a
malfunction.
26
En
What it does
• If the disc is stopped,
playback starts from the
selected title (for DVD) or track
number (for CD/Video CD/
3
Super VCD/WMA/MP
few seconds (or after pressing
ENTER
).
• If the disc is playing,
playback jumps to the start of
the selected chapter or track
after a few seconds (or after
ENTER
pressing ).
(stop) buttons on
and ) work slightly
DVD/CD TAPE TUNER LINE
OPEN/CLOSE
3/8
4 1 ¡ ¢
TUNING – TUNING +
REVERSE
MODE
7
REC/STOP
STEREO DVD TUNER DECK
EV61DVD
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW discs.

Resume and Last Memory

When you stop playback of a DVD or Video CD
) after a
disc, RESUME shows in the display indicating
that you can resume playback from that point.
If the disc tray is not opened, the next time you
start playback the display shows RESUME
and playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time,
the display shows LAST MEM and you can
resume playback (this works for up to five
discs).
If you want to clear the resume/last memory
point, press
MEM is displayed.
• When a Video CD is loaded, the Resume
point is lost if the system is switched off,
or switched to a function other than DVD/
CD.
• For the Last Memory function to work, you
must press
before opening the disc tray.
• The Last Memory function doesn't work
with VR format DVD-RW discs.
• After I load a DVD disc, it ejects
automatically after a few seconds!
Most likely, the disc is the wrong region
for your player. The region number should
be printed on the disc or disc packaging;
check it against the region number of the
player (which you can find on the rear
panel). See also DVD Video regions on
page 80.
(stop) while RESUME or LAST
(stop) to stop playback