7.2-channel av receiver featuring class d3 (direct energy hd) amplifier, hi-bit24 audio signal processing, ultra hd (4k) upscaling/pass-through, and htc connect certification (2 pages)
INPUT SELECT STATUS RECEIVER FM wire antenna INPUT VOLUME TV CONTROL MUTE Thank you for buying this Pioneer product. This Quick Start Guide AUDIO VIDEO PARAMETER PARAMETER TOP MENU TOOLS MENU includes instructions for basic connections and operations to allow...
Page 2
English Enjoy easy multichannel playback with this unit in 3 steps: Connecting up → Initial setup → Basic playback. Convenient with easy connection and initial setup upon following the instructions displayed on-screen by installing AVNavigator. • The Mac OS version of AVNavigator can be downloaded from http://www.pioneerelectronics.com. • The iPad version of AVNavigator can be downloaded from the App Store.
Connecting up After installing the speakers, connect them as shown below. Connecting the speakers Center The receiver will work with just two stereo speakers (the front speakers in the diagram) but using Subwoofer Front Right Front Left (SW) at least five speakers is recommended, and a complete setup is best for surround sound. To achieve the comfortable surround sound, install your speakers as shown below.
Connecting to the network through cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, LAN interface ask your nearest Pioneer authorized independent service company for a replacement. Internet Modem...
Initial Setup Before you start Automatically setting up for surround sound (MCACC) Put the batteries in the remote control. The Auto Multi-Channel Acoustic Calibration (MCACC) setup The Full Auto MCACC screen appears on your TV. uses the supplied setup microphone to measure and analyze 1a.Full Auto MCACC the test tone that is outputted by the speakers.
Basic playback Switch on the playback component. Multichannel playback Listening to the radio E.g.) Turn the Blu-ray Disc player connected to the HDMI Press TUNER to select the tuner. BD IN terminal on. STANDBY/ON ALL ZONE STBY SOURCE DISCRETE ON Switch the input of the receiver.
Playback with NETWORK feature included with the iPod and Pioneer disclaims any liability in connection with such Setting the Audio options occurrences. Pioneer does not represent or warrant that Setting the Video options...