Connecting Auxiliary Components; Connecting The Optional Surround Speakers (Ev31Dvd Model Only); Connecting The Power - Pioneer S-EV31V Operation Instruction Manual

02 Connecting up
Connecting auxiliary
components
This system has both stereo analog inputs
and outputs. Use these to connect external
components, such as a VCR, MD, CD-R or
DAT recorder.
• Connect the LINE IN jacks on the rear
panel to an auxiliary playback
component.
These include components such as a VCR,
DAT, or your TV. Connect using RCA pin-plug
stereo cables.
• Connect the LINE OUT jacks on the rear
panel to a recording component.
These include components such as a
cassette deck, VCR, MD recorder, or another
recorder with analog inputs. Connect using
RCA pin-plug stereo cables.
EV31 DVD model only
• DTS sources cannot be heard through the
LINE OUT jacks.
Connecting the optional surround
speakers (EV31DVD model only)
You can connect surround speakers to the left
and right SURROUND speaker jacks on the
rear panel to hear additional surround sound
from this unit.
• Use speakers with a nominal impedance
of at least 16Ω.
• Make sure you connect both surround
speakers or you won't be able to hear
anything from the surround jacks.
14
En
• Connect the surround speakers to the
SURROUND jacks on the rear of the unit
using RCA speaker cables.

Connecting the power

After making sure that everything is
connected properly, plug in the power cord to
the AC inlet, and the other end to a mains
power outlet.
• If your model has a voltage selector
switch (located at the bottom of the AC
inlet), make sure it is set to match the
voltage of your country or region (see
page 3 for more on this).
Congratulations! You're done setting up.