Setting The Relative Volume Level Of Each Channel - Pioneer Elite VSX-41 Operating Instructions Manual

06 Setting up the receiver
Setting the relative volume level
of each channel
• Default setting: 0db
For best surround sound playback, you should
set the relative channel levels from the main
listening position. You can set separate levels
for each surround mode.
1 Press RCV.
2 Press STANDARD.
3 Press TEST TONE to output the test
tone.
The test tone is output in the following order
(depending on the speaker setting):
FL
SW
If you don't hear a test tone from one of
your speakers, please refer to Speaker
setting on page 37 to make sure you have
correctly specified your speaker setup.
4 Press MASTER VOLUME +/– to adjust
the volume to an appropriate level.
5 Use LEVEL +/- to adjust the speaker
levels in turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level range
is ± 10 dB.
6 When you're done, press TEST TONE to
turn off the test tone.
42
En
C FR
SR
SL SB
The speaker volume can be adjusted
without outputting the test tone by
pressing CH SELECT and then using
LEVEL +/–.
SOURCE RECEIVER
LEARN ERASE SEARCH BY BRAND
DVD TV VCR
MULTI CONTROL
RCV CD TUN
2
1
TEST TONE INPUT ATT FL DIMMER
4 5
CH SELECT LEVEL
8
7
+10 EFFECT
0
ENTER
DTV INFO MPX/RETURN D.ACCESS
3
¶
7
BAND CLASS DTV ON/OFF
1 ¡
4
TOP MENU AUDIO SUB TITLE
REMOTE SETUP STANDARD ADV.SURR.
MIDNIGHT/
INPUT SEL.
SIGNAL SEL LOUDNESS
RECEIVER CONTROL
TUNE
T
ST
ENTER
TUNE
CHANNEL
MENU
TV INPUT MASTER VOLUME
TV VOL
TV
TV CONTROL
• Test tone is only output in Standard
modes.
• Since the subwoofer transmits an ultra-
low frequency its sound may seem quieter
than it actually is.
CD-R
TVC
3
6
9
DISPLAY
DISC
T.EDIT/GUIDE
8
DTV MENU
¢
ANGLE
STEREO
MUTE
ST