Panasonic WJ-FS616 Operating Instruction page 18

Video multiplexer

Hide thumbs Also See for WJ-FS616:

Table of Contents

Connection with the Camera Sites

Connect the Camera Site equipment to the Camera

Input Connectors (CAMERA IN 1-16) on the rear of

the Video Multiplexer.

Note: Make sure that the cable length between the

camera site and the WJ-FS616 Video Multi-

plexer is less than 1 200 m (4 000 ft) when

using RG-6/U (5C - 2V) or equivalent cables.

RS485

A B

CAMERA

OUT

Video Multiplexer WJ-FS616

-16-

Connect the Camera Site equipment to the RS485

Terminal on the rear of the Video Multiplexer, when

specified equipment is connected.

Note: If you use cables assembled from locally

procured materials, it is important that only

high quality, data grade cable, suitable for RS-

485 "2-wire twisted pair shielded cable" is

used.

Low grade cable will result in unstable opera-

tion of the system.

AUX

Alarm

Table of Contents