Installing The Printer Driver Using The Add Printer Wizard; For Windows Xp/Server 2003 - Konica Minolta BIZHUB 350 User Manual

Installing the printer driver

Installing the printer driver using the Add Printer Wizard

Note
For IPP printing, it is not necessary to install the printer driver at this time
since IPP printing setup is performed when the printer driver is installed.
For further details on IPP printing, refer to "IPP printing (Windows
2000/XP/Server 2003)" on page 4-22.
For details on installing the printer driver in a network environment, refer
to "Setting up network printing" on page 4-3. Because it is necessary to
specify other network settings in advance when installing the printer
driver using a network connection, install it using a local connection at
this time.

For Windows XP/Server 2003

1
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
– Konica Minolta PCL driver: User Software CD-ROM
– Konica Minolta PostScript driver: PostScript Printer Driver CD-
ROM
2
Click the [Start] button, and then click "Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other
Hardware", and then select "Printers and Faxes".
3
For Windows XP, click "Add a printer" on the "Printer Tasks" menu.
– For Windows Server 2003, double-click the "Add Printer" icon.
The Add Printer Wizard starts up.
bizhub 350/250 (Phase 2.5)
Windows XP Windows Server 2003
3
3-13