Konica Minolta BIZHUB 350 User Manual page 106

Print operations

Hide thumbs Also See for BIZHUB 350:

Table of Contents

Printer Number: Specify "255". (Set the number assigned to the

printer (0 to 254) or 255.)

Restart this machine (turn the main power off, then on again).

Use the NetWare server console to load MONITOR.NLM.

Select the connection information and, in the active connection

column, check that the created Pserver is connected.

When turning the machine off, then on again with the main power switch,

wait about 10 seconds to turn the machine on after turning it off. The

machine may not operate correctly if it is turned on immediately after

being turned off.

Setting up network printing

bizhub 350/250 (Phase 2.5)