Specifying The Status Settings For The Functions (Software Sw); Software Sw - Konica Minolta BIZHUB 350 User Manual
Print operations
Hide thumbs
Also See for BIZHUB 350:
- Operations (518 pages) ,
- User manual (472 pages) ,
- Operation manual (162 pages)
Table of Contents
Advertisement
Various settings
11.3
Specifying the status settings for the functions
(Software SW)
By specifying the Software SW numeric values (mode, bit, HEX) according to
the usage conditions of this machine, the status of each function can be
changed.
Reminder
Do not change any modes or bits other than those described in this
manual.
Note
When "Enhance Security" is set to "ON", the software switch settings
cannot be changed.
Software SW
Item
Mode
Bit
HEX
bizhub 350/250 (Phase 2.5)
Description
Represents the setting with a three-digit number. Type in the
value using the keypad.
An eight-digit number that configures the mode status. Specify
the status of the function by specifying the bit for each number
from 7 to 0 with a binary number (1 or 0).
The status of each function is displayed by a combination of
hexadecimal numbers (0 to 9, A to F). When Bit Selection is
"00110000", HEX Selection can be represented as "30".
The status of the mode is specified in Bit Selection or HEX Se-
lection.
11
11-23
Advertisement
Table of Contents
