Konica Minolta BIZHUB 350 User Manual page 340
Print operations
Hide thumbs
Also See for BIZHUB 350:
- Operations (518 pages) ,
- User manual (472 pages) ,
- Operation manual (162 pages)
Table of Contents
Advertisement
11
Item
TCP/IP Configuration
DHCP Configuration
IP Address
Subnet Mask
Gateway Address
RAW Port Number
Self-Domain Name
Port Number
DNS Configuration
Host Name
Domain Name
DNS Server Address
DNS Query Timeout
SLP Setting
LPD Setting
Reminder
To apply any changes to settings for "DHCP Configuration", "IP
Address", "Subnet Mask", "Gateway Address", or "Self-Domain Name",
restart this machine (turn the main power off, then on again).
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.
11-76
Description
Specify whether to enable TCP/IP.
Specify whether to enable the DHCP server.
Specify the IP address of this machine (format: "***.***.***.***", input
range for ***: 0-255 Note that the following values cannot be entered
in the most significant byte: 0, 127, 224-255).
Specify the subnet mask connecting to a network (format:
"***.***.***.***", input range for ***: 0-255).
Specify the default gateway address connecting to a network (for-
mat: "***.***.***.***", input range for ***: 0-255 Note that the following
values cannot be entered in the most significant byte: 0, 127, 224-
255).
Specify the RAW port number (input range: 1-65535).
Specify the domain name for this machine. (up to 64 alphanumeric
characters and symbols (! # $ % & ' * + - . / = ? _ ` { | } ~))
Specify the port number of your device (entry range: 1-65535).
Specify whether to use the DNS server.
Input the host name connecting to a network. (up to 64 alphanumeric
characters and symbols (-))
Specify the domain name for this machine (up to 64 alphanumeric
characters and symbols (! # $ % & ' * + - . / = ? _ ` { | } ~ @)).
Register a maximum of three DNS servers (format: "***.***.***.***", in-
put range for ***: 0-255 Note that the following values cannot be en-
tered in the most significant byte: 0, 127, 224-255).
Specify the time for an inquiry timeout to the DNS server.
Specify whether to enable the SLP function.
Specify whether to enable the LPD function.
Various settings
bizhub 350/250 (Phase 2.5)
Advertisement
Table of Contents
