Setting up network printing
–
Printer Number: Specify "255". (Set the number assigned to the
printer (0 to 254) or 255.)
7
Restart this machine (turn the main power off, then on again).
8
Use the NetWare server console to load PSERVER.NLM.
9
Use the NetWare server console to display the print server screen, and
then check that "XXX" (created printer) is shown as "Waiting for Job"
for the connected printer (0).
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.
bizhub 350/250 (Phase 2.5)
4
4-35