Konica Minolta BIZHUB 350 User Manual page 75

Setting up network printing
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
Driver type
Konica Minolta
PCL
Konica Minolta
PostScript
PostScript PPD
*1
If the printer driver is installed using the installer while this machine is
connected to the network, the required Peer to Peer Printing Tool is also
installed automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
To obtain the Peer to Peer Printing Tool, consult the dealer where you
purchased this machine.
To specify the driver settings when installing the Peer to Peer Printing Tool,
refer to "Port 9100 Printing (Windows 98 SE/Me/2000/XP/Server 2003)" on
page 4-19.
When using Windows printing, you can perform network printing without
installing the Peer to Peer Printing Tool software. For details, refer to
"Windows printing" on page 4-12.
Note
Before setting up network printing, install the printer driver. For details,
refer to "Installing the printer driver" on page 3-3.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the
settings on this machine as necessary. For an IPP connection, it is
necessary to install the printer driver first.
Only the PCL printer driver can be used with Windows printing. If network
printing with the PostScript printer driver, use LPR printing or Port 9100
printing.
bizhub 350/250 (Phase 2.5)
Operating System
Windows 98SE/Me
Using installer Not using in-
staller
*1
Not required Required
*2
-
*3
- Required
Windows 2000/XP/2003
Using installer Not using in-
staller
*4
Not required
*2
-
4
4-7