Various settings
Network tab - Common Setting - AppleTalk
You can specify the AppleTalk settings.
Item
AppleTalk
Printer Name
Zone Name
Current Zone
Reminder
To apply any changes to settings for "Printer Name" or "Zone Name", re-
start this machine (turn the main power off, then on again).
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The settings
may not be applied correctly if the machine is turned on immediately after
it is turned off.
200/250/350
Description
Specify whether to enable AppleTalk.
Enter the printer name (up to 31 alphanumeric characters, excluding
= ~).
Specify the zone name (up to 31 alphanumeric characters, excluding
= ~).
Displays the current zone name.
10
10-75