Network Connection Methods That Can Be Selected In Each Windows Operating System; Network Printing From A Windows Operating System - Konica Minolta BIZHUB 350 User Manual

3
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (Windows, LPR, or IPP printing). Select the best method of network
printing for your Windows environment.

Network printing from a Windows operating system

Windows
printing
LPR printing
IPP printing
Port 9100
printing
* When using Port 9100 printing under Windows 98 Second Edition or Windows Me, the Peer to
Peer Printing Tool must be installed. For the details, refer to the table below.
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
Driver type
Konica Minolta
PCL
Konica Minolta
PostScript
PostScript PPD
*1
If the printer driver is installed using the installer while this machine is con-
nected to the network, the required Peer to Peer Printing Tool is also installed
automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
3-4
Proto- Win- Win-
col used dows 98 dows
SE Me
TCP/IP,
+
NetBEUI
TCP/IP
TCP/IP
TCP/IP
+
*
Operating System
Windows 98SE/Me
Using installer Not using in-
staller
*1
Not required
*2
-
*3
-
Setting up network printing
Win- Win-
dows dows
2000 XP
+ + +
o o
o o
+
* o o
Windows 2000/XP/2003
Using installer
Required
Required
Win- Win-
dows dows
NT 4.0 Server
2003
+ +
o o
o
o
Not using in-
staller
*4
Not required
*2
-
200/250/350