Center Staple And Fold; Selecting The Output Method - Konica Minolta BIZHUB 350 User Manual

5

Center Staple and Fold

You can fold and staple printouts in half.
1
Click the Setup tab.
2
Select the "Center Staple and Fold" check box.
Note
The Center Staple and Fold function is only available when the optional
finisher and saddle kit are installed.

Selecting the output method

Not only can you print directly, but you can select "Secure Print", which re-
quires a password to print, or "Save in User Box", which saves documents
in the document folder.
The Save in User Box and Save in User Box and Print functions can only be
used when an optional hard disk is installed.
The Save in User Box, Save in User Box and Print, and Proof and Print func-
tions cannot be specified when the "Per Page Setting" setting is specified.
1
Click the Setup tab.
2
From the "Output Method" drop-down list, select the output method.
– Print: Prints immediately.
– Secure Print: Saves the document to be printed in the secured doc-
ument box of this machine. When printing, you are required to enter
the user ID and password in this machine's control panel. Select
when printing highly confidential documents.
– Save in User Box: Saves the document to be printed in a box on this
machine.
– Save in User Box and Print: Saves the document in a box and prints
at the same time.
– Proof and Print: After part of the document has been printed, this
machine stops printing temporarily. Select to avoid misprinting
large print jobs.
5-12
Setting up the PCL driver
200/250/350