2
Specifying Program Settings
The destination and scan settings can be registered together as a single
program. This is convenient for frequently scanning documents and sending
data under the same conditions.
These settings are specified from the touch panel of the machine.
!
Detail
For details, refer to "Registering Program Destinations" on page 4-27.
Specifying Default Scan Settings
The settings that are selected when [Scan] in the control panel is touched
can be specified.
!
Detail
For details, refer to "Setting the Save Format of the Data to Be Scanned"
on page 4-40.
2-12
Before Using the Scan Functions
bizhub 750/600 (Phase 2)