2
Specifying program settings
The destination and scan settings can be registered together as a single
program. This is convenient for frequently scanning documents and sending
data under the same conditions.
These settings are specified from the touch panel of the machine.
!
Detail
For details, refer to "Registering program destinations" on page 4-27.
Specifying default scan settings
The settings that are selected when [Scan] in the control panel is touched
can be specified.
!
Detail
For details, refer to "Setting the save format of the data to be scanned"
on page 4-40.
2-12
Before using the scan functions
bizhub C450 (Phase3)