Scanning Documents
Entering the Addresses Directly
"Direct input" refers to the operation of directly inputting the destination
address from the machine's control panel.
Up to five destinations can be specified through direct input.
1
Press the [Scan] key on the control
panel.
The Scan mode screen appears.
2
Touch [Direct Input], then [Scan to SMB].
A screen for entering the destination host name, destination folder, and
other information appears.
Why is the Direct Input tab not displayed?
?
% If the [Manual Destination Input] on the Security Details screen
(displayed by touching [Security Setting] on the Administrator
Setting screen) is set to [Restrict], the Direct Input tab does not
appear.
bizhub 750/600 (Phase 2)
3
3-45