Scanning Documents
File Name
You can change the file name to be saved.
!
Detail
If a file name is not specified when the data was scanned, it will
automatically be specified by combining the mode and the date and time
at the time the file was saved. For specifying the file name, refer to
"Specifying E-Mail Settings" on page 3-92.
Note
To clear all of the file names that are displayed, press the [C] (clear) key.
Up to 30 characters can be entered.
To change the file name
1
In the Scan mode screen, touch [Scan Settings].
2
Touch [File Name].
bizhub 750/600 (Phase 2)
3
3-83